posted:2019-07-16
In general, biomass thermal power plants with an installed capacity of 12 MW can be equipped with 75 ton/hr biomass boiler. Biomass power generation is a CDM (Clean Development Mechanism) project that is widely implemented in the world. The biomass generator set with a installed capacity of 12MW will reduce CO₂ emissions by 38,500 tons per year, which can greatly reduce global greenhouse gas emissions. It is much cleaner than coal-fired thermal power and has very little pollutant emissions.
Biomass power generation technology is a technology that converts biomass energy into electricity. It mainly uses crop straw and forestry waste as fuel for power generation. As a renewable energy, biomass power generation has a rapid growth in past a few years all over the world. Biomass boilers are one of the core equipments for biomass power plants. The selection of boilers is of great significance for reducing power generation costs and reducing pollutant emissions.
A 75 ton biomass fluidized bed boiler can be used in a power plant with a power generation of 12 mw. A 12 MW biomass fuelled power plant is a state-of-the art facility and will utilize approximately 45.6 tons per hour (t/hr) of biomass fuel to produce approximately 75 tons/hr of 5.2 MPa (754 psig) of high pressure steam at 485°C (905°F) and up to 12 megawatts (MW) of electricity.
Model: ZG75-5.2/485
Rated steam capacity: 75 ton/hr
Rated working pressure: 5.2 MPa
Rated steam temperature: 485 ℃
Feed water temperature: 104 ℃
Fuel design: biomass pellets, coal, bagasse, palm shell, rice husk
Our biomass cfb boiler has better adaptability for almost all kinds of biomass fuel source. A fluidized bed is formed when a quantity of a solid particulate substance (usually present in a holding vessel) is placed under appropriate conditions to cause the solid/fluid mixture to behave as a fluid. The boiler uses low-temperature combustion characteristics of fluidization inhibit alkali metal problem in straw combustion, which is better suited for biomass fuel.